Harley Moto Davidson Biker Sticker #1 | Motorcycle Sticker | 5 x 4

When applying the Decal, it is very easy to do so on any plain surface. The Decal you received has three parts: Vinyl Decal, Paper Backing, and Clear Transfer Tape. First, clean the surface where the decal will be installed. Slowly remove the paper backing, ensuring that your decal remains stuck to the transfer tape. If part of the decal lifts up with the backing, press the paper backing back down against it until it stays stuck to the transfer tape.

Once the backing is peeled away, line up and position your decal against the surface to which it will be applied. Use a credit card as a squeegee to smooth down your decal, making sure that it is completely stuck to the surface. Slowly and carefully remove the transfer tape from your decal, ensuring that the decal is firmly attached to the surface.

If you see part of the decal does not release from the transfer tape, press it back down to the surface and repeat the process. The Motorcycle Bar and Shield: Design #1 - Vinyl Decal Sticker is self-adhesive and will not harm your paint or natural finish. It can be applied and reapplied for the desired look, and is water-proof and stain-resistant, with an indoor life of over 8 years and an outdoor life of over 5 years, with UV protection.

The decal can also be used with a heat gun or household blow dryer for shaping, as it is very flexible and stretchable, and super thin (0.2mm) to fit in most tight spots or corners. It can be used for other projects other than automotive, making it a versatile option. The instructions for applying the decal are as follows:

1. Rub the sticker to be sure the transfer tape is properly attached to the sticker.
2. Clean and dry the chosen area.
3. Remove the wax backing slowly, making sure the sticker stays attached to the transparent transfer tape.
4. Carefully place the sticker to the wanted area.
5. Rub the sticker from one side to the other, removing any air bubbles.
6. Use an object like a card to make sure the entire sticker is fully attached to the surface.
7. Slowly remove the transfer tape.

Overall, the Motorcycle Bar and Shield: Design #1 - Vinyl Decal Sticker is a super easy-to-use product that can be applied and reapplied to a variety of surfaces, making it a great option for customizing your motorcycle or other projects.

product information: